MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Syrag64 on July 06, 2012, 05:44:51 pm

Title: Wheel et question
Post by: Syrag64 on July 06, 2012, 05:44:51 pm
Hi i have a set of LM reps in size 19" 8.5 & 9.5 wide, i bought them off ebay off a guy who had them on his audi and advertised as ET45, but now i'm confused, the wheels have a sticker on the rim of the wheel saying they are ET45 with all the other info from the factory, but when i look on the inside edge of the wheel there is an actual stamp into the alloy that says et +35, now can anyone tell me if the wheels are et45 or et35?  :confused:
Title: Re: Wheel et question
Post by: higher1 on July 06, 2012, 08:00:55 pm
Pop them on the car and see where they sit if there pretty flush there 45s if they poke there 35
Title: Re: Wheel et question
Post by: Syrag64 on July 06, 2012, 09:47:13 pm
Car is currently in garage having a few parts fitted :evilgrin: they did try 1 of the wheels on the front of the car and found it needs a spacer to clear my NQBBK :evilgrin:  :driver:
 
Title: Re: Wheel et question
Post by: gazbutS3 on July 06, 2012, 09:50:01 pm
I'd go with the stamping :happy2:
Title: Re: Wheel et question
Post by: Top Cat on July 06, 2012, 11:53:05 pm
I am going against the advice of Gaz. My guess is they are stamped 35et because they are copies of the originals,  when the actual size will be 45et because that is what the Americans all want.  :driver:
Title: Re: Wheel et question
Post by: Syrag64 on July 07, 2012, 07:01:41 pm
Cheers TC, i was hoping for an answer like that :happy2:

The guy i got them off says he had ET35 on his car and they rubbed so got these ET45.

The stamp actually says ET+35 does that make any difference?
Title: Re: Wheel et question
Post by: stu_no_1 on July 07, 2012, 08:44:33 pm
with reps anything could be possible could be taken from a mould of et35 wheels and machined down to 45 but i dont know best way would be to fit them and see if they poke et 35 will poke a fair bit and like someone sai et45 should be flush almost
Title: Re: Wheel et question
Post by: Syrag64 on July 07, 2012, 09:27:43 pm
Cheers everyone, soon as i get the car back from the garage and get myself a set of spacers to clear my NQBBK they'll be going on  :evilgrin: