MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Yawn on July 14, 2012, 08:41:59 pm
-
I have a jetta (don't shoot me it is a 2.0 tfsi) and it has asymetrical rear lights. LHS reverse, RHS fog.
My question is.............
Can I fit a LHD LHS light (with clear lense) but with a red bulb? legally I mean.
I fancy getting symetrical if possible.
-
iirc when TC had his GTI he did this to his LED rears so it's certaily possible...
-
Thanks, I just wondered if it'd be OK come MOT time?
-
I been waiting for a chap in Belgium to come back to me on the LED boards for doing the Skyline mod. I was then going to do the above so I would have 2 reverse lights and then the outer ring of the inner lights would act as rear driving lights and/or fog lights so I would have 2 fog lights too.
-
I did it the over way,when I changed my rear lights I put the red lens out of fog light and put it in where the clear lens is for the reverse light is,know it shows red when I reverse :rolleye:
-
I did it the over way,when I changed my rear lights I put the red lens out of fog light and put it in where the clear lens is for the reverse light is,know it shows red when I reverse :rolleye:
I wondered about that as well, but as I use my reversing light more than my fog I'm not sure. Did you have any problems at MOT time? :confused:
-
I been waiting for a chap in Belgium to come back to me on the LED boards for doing the Skyline mod. I was then going to do the above so I would have 2 reverse lights and then the outer ring of the inner lights would act as rear driving lights and/or fog lights so I would have 2 fog lights too.
Blimey thats sounds cool but way beyond my abilities unfortunately :ashamed:
-
No probs last year but there is new regulations out now so not sure if it would pass but I work in a garages so but I still might have to swap it back over as he is very strict
-
Done this now and have symmetry at last. Used a silver/red bulb and looks ok but considering a red LED.
anyone used a red LED? are they very bright?
-
id consider myself a bit of an LED Freak, OCD LED :laugh: and ive looked into this.
i wouldn't bother at the moment, as theyre just way too dim.
the brightest CREE LED is even a waste of time. maybe in a couple of years!
its the same for the reverse light. just not bright enough for any proper use.
hope that helps!
Thom
-
id consider myself a bit of an LED Freak, OCD LED :laugh: and ive looked into this.
i wouldn't bother at the moment, as theyre just way too dim.
the brightest CREE LED is even a waste of time. maybe in a couple of years!
its the same for the reverse light. just not bright enough for any proper use.
hope that helps!
Thom
Well it wasn't what I was hoping to hear but yes it does help.
Thanks
-
just an add on question?
i have two mini bulbs out on one side of the indicator on my leds.
what is easiest way to solve this. do i need a whole new ring?
matsu