MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: scopes on August 29, 2012, 11:53:19 pm

Title: Fitting an S3 cooler to a Forge FMIC
Post by: scopes on August 29, 2012, 11:53:19 pm

Hey All

Would it work ok, Fitting an S3 cooler to a Forge FMIC thats already fitted...
Or
would there be new pipes required

How much different would that be with the fittings over the standard cooler?

Could you get away with a slight adjustment to the forge pipe work

thanks
Scopes

Title: Re: Fitting an S3 cooler to a Forge FMIC
Post by: bacillus on August 30, 2012, 08:00:30 am

Unfortunately and afaik you will need the Forge S3 twintercooler hoses (hoses 296 and 297).

Title: Re: Fitting an S3 cooler to a Forge FMIC
Post by: scopes on August 30, 2012, 10:34:49 am

Cheers bacillus there about 200 quid if i remember right

Title: Re: Fitting an S3 cooler to a Forge FMIC
Post by: bacillus on August 30, 2012, 02:57:21 pm

Quote from: scopes on August 30, 2012, 10:34:49 am

Cheers bacillus there about 200 quid if i remember right

I explored this a couple of years back and iirc the hoses were only around £125ish. I would give Forge a ring to confirm a price.

Title: Re: Fitting an S3 cooler to a Forge FMIC
Post by: scopes on August 30, 2012, 03:55:39 pm

 :happy2: