MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: bakili on October 21, 2012, 09:56:35 am

Title: RNS 510 voice command
Post by: bakili on October 21, 2012, 09:56:35 am

I have rns 510 B version 4020 firmware and v8 maps. Recently installed 5N0 Bluetooth with microphone. Will RNS 510 have voice command option now? When i press i button it bring audio set up menu but no voice command. How can i activate voice command? Also have star button on st/wheel, but it only works as mute button.
Thanks

Sent from my GT-I9100 using Tapatalk 2

Title: Re: RNS 510 voice command
Post by: JoeDarKa on October 21, 2012, 10:07:31 am

Dont you need to code in?

Title: Re: RNS 510 voice command
Post by: Eddie-NL on October 21, 2012, 10:15:29 am

It will need coding in the RNS510 and the steering controller

Title: Re: Re: RNS 510 voice command
Post by: bakili on October 21, 2012, 10:44:04 am

Thanks
Can I ask for how to guide.
I have someone local with vcds.

Sent from my GT-I9100 using Tapatalk 2

Title: Re: RNS 510 voice command
Post by: Eddie-NL on October 21, 2012, 11:19:38 am

RNS510

Select Radio 56 > Coding > Long Coding scroll through till you see Voice Control inactive and untick it

Steering wheel

Select Steering 16 > Coding

The following table applies to Control Modules with Software Version 0101 or lower.
 0?xxxxx: Vehicle Type 0 = Normal
1 = Special Purpose (e.g Taxi)

0x?xxxx: Transmission 0 = Manual Transmission
1 = Automatic Transmission

0xx?xxx: Steering Wheel 0 = Steering Wheel without Multifunction
1 = 3-Spoke Steering Wheel without Multifunction
2 = 3/4-Spoke Steering Wheel with Multifunction without Cruise & Voice Control
3 = 3/4-Spoke Steering Wheel with Multifunction with Cruise & Voice Control

0xxx?xx: Additional Equipment +1 = Tiptronic (Shift Paddels)

0xxxx?x: Board Computer / Cruise Control System (CCS) 0 = w/o Board Computer and w/o Cruise Control System (CCS)
1 = with Board Computer and w/o Cruise Control System (CCS)
2 = w/o Board Computer and with Cruise Control System (CCS)
4 = with Board Computer and with Cruise Control System (CCS)

0xxxxx?: Rear Wiper 1 = Rear Wiper not installed
2 = Rear Wiper installed

Title: Re: Re: RNS 510 voice command
Post by: bakili on October 21, 2012, 12:21:18 pm

Thanks a lot Eddie

Sent from my GT-I9100 using Tapatalk 2

Title: Re: RNS 510 voice command
Post by: bakili on October 27, 2012, 10:39:01 am

Thanks again Eddie  :happy2:
All works now, I have voice commands now  :happy2:

Where can I find Voice Command List please.

Title: Re: RNS 510 voice command
Post by: Eddie-NL on October 27, 2012, 08:13:19 pm

Quote from: bakili on October 27, 2012, 10:39:01 am

Thanks again Eddie  :happy2:
All works now, I have voice commands now  :happy2:

Where can I find Voice Command List please.

Trial and error

most common would be

Map, Navigation, Radio, Media, Phone, Cancel etc