MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: SI-R32 on November 18, 2012, 08:07:16 pm

Title: Do you want pre outs from the RNS 510
Post by: SI-R32 on November 18, 2012, 08:07:16 pm

Have a look at this

http://www.r32oc.com/topic/45797-rns-510-pre-outs/

Title: Re: Do you want pre outs from the RNS 510
Post by: Squeeguk on November 18, 2012, 09:48:31 pm

Nice one Si.  :happy2: Almost exactly what I have do. I either do it that way or use the high level inputs into the newer amps which accept them, but using the connector blocks and terminals for the quad-lock.

Title: Re: Do you want pre outs from the RNS 510
Post by: SI-R32 on November 18, 2012, 10:27:16 pm

yeah i've tried the speaker level into my blaupunkt amp but really weren't liking it, then i used the bundled loom with the amp converting single wires to phono at the amp end at low level but was picking up interference so decided to go the whole hog and finally do a proper job of it.

still got to run the phono's in yet but i'm sure it will sound a lot better