MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: tonto83 on November 27, 2012, 07:27:44 pm

Title: RNS510 and midline. Coding needed?
Post by: tonto83 on November 27, 2012, 07:27:44 pm

I've managed to persuade the other half to get me an RNS510 for Xmas.

Currently I have a mfsw and midline display.  I realise if I had the highline I would have the rns display on the dash.

My question is, do I need to get the rns coded or is it just just a straight swap over?

Probably a stupid question.

Cheers,

Paul

Title: Re: RNS510 and midline. Coding needed?
Post by: fab5freddy on November 27, 2012, 09:12:29 pm

Hey Paul,

Just requires you to tell the can gateway you have installed sat nav.

Tick number 37 in the installation list, job done  :happy2:

Title: Re: RNS510 and midline. Coding needed?
Post by: tonto83 on November 27, 2012, 10:05:59 pm

Thanks James, appreciate that :)

Title: Re: RNS510 and midline. Coding needed?
Post by: bacillus on November 27, 2012, 10:40:58 pm

If you have the oem amp under your passenger seat (sound pack option) then you'll also need to code the rns510 for it to lower its output to the amp.

Title: Re: RNS510 and midline. Coding needed?
Post by: tonto83 on November 28, 2012, 03:01:34 pm

Thanks for the reply Bacillus but my car doesn't have such luxuries.