MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Breamy1990 on December 31, 2012, 12:33:45 pm

Title: Four wheel alingment
Post by: Breamy1990 on December 31, 2012, 12:33:45 pm

Does anyone know were i can have this done in or around sheffield/rotherham

Thanks

Title: Re: Four wheel alingment
Post by: berg on December 31, 2012, 02:06:11 pm

check out wheels in motion website for trained/approved garages.

Nigel Lang in Bolton but is a bit of a drive from Sheffield.

Title: Re: Four wheel alingment
Post by: gigolo456 on December 31, 2012, 02:12:02 pm

Dare I say Kwikfit, they all have a fancy machine to do it, not too expensive if I remember!?

Title: Re: Four wheel alingment
Post by: JoeDarKa on December 31, 2012, 03:31:00 pm

I would avoid kwikfit / ATS. My local one did mine, went back as it was worse than before, said they couldnt do anything as it was lowered!

Title: Re: Re: Four wheel alingment
Post by: Breamy1990 on December 31, 2012, 04:44:02 pm

Rang round and most places i thought could do it dont

But i have found a place and its booked in wedneaday afternoon, £60 + 4tyres :'(

Title: Re: Four wheel alingment
Post by: Nodz on December 31, 2012, 05:21:49 pm

That seems cheap as a proper alignment is at least £75+ then tyres on top.

Title: Re: Four wheel alingment
Post by: Ranbeer Singh on December 31, 2012, 05:28:52 pm

Midland VW - Cannock --- can't go wrong with them  :happy2:

Rick

Title: Re: Four wheel alingment
Post by: Northerner on January 01, 2013, 09:03:16 am

Auto Dynamics in Attercliffe have a Hunter alignment machine.

Have a look at alignmycar.co.uk for a money off voucher.

Title: Re: Four wheel alingment
Post by: Hurdy on January 01, 2013, 11:41:27 am

Dexel on Staniforth Road in Sheffield have a 4 wheel alignment machine too. :happy2:

Title: Re: Re: Four wheel alingment
Post by: Breamy1990 on January 10, 2013, 02:48:37 am

Thanks its booked in with auto dynamics monday !

Now hes another question ive been pondering all day, i fitted coilovers and some 17inch alloys, as my tdi had 16's standard, is there anything i will need to buy to correct camber etc? Im thinking just incase i get there and the guys say you need so and so parts