MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: ArildStavrum on January 16, 2013, 04:59:48 pm

Title: K&N Typhoon vs Neuspeed P-Flo
Post by: ArildStavrum on January 16, 2013, 04:59:48 pm
I'm going to get either of these kits but cannot decide which one!

Does anyone have an opinion on either? quality? noise?performance gain?
I think they are fairly similar in noise as I've listened to a few clips on youtube.....

The K&N Typhoon can be got for under £200 notes now and the Neuspeed is £188.70 so there is really nothing in the price!

My GTI is currently Stage 1, Milltek Catback, SALK, autotech HPFP internals (being fitted on 1st Feb), owered on H&R springs (30mm) with a Carbonio CAI (this will be for sale if I get one of the above!)

All opinons welcome!

Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: donovan2123 on January 16, 2013, 08:28:22 pm
K&n mate.

Why? they both use the exact same filter and same quality pipe.

Nuespeed is shorter and sits direct in front of air duct but k&n comes with a complete plastic heat shield and pushes are to filter and stops mosthhot air entering unlike the Nuespeed which can draw engine heat.

Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: ArildStavrum on January 16, 2013, 08:49:15 pm
K&n mate.

Why? they both use the exact same filter and same quality pipe.

Nuespeed is shorter and sits direct in front of air duct but k&n comes with a complete plastic heat shield and pushes are to filter and stops mosthhot air entering unlike the Nuespeed which can draw engine heat.



Thanks for the reply. I was under the impression that the neuspeed came with a heatshield but the typhoon didn't.

Will check it out though.
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: RENNTAG on January 16, 2013, 08:54:01 pm
I have the neuspeed and thin its great. However there is defnately no heat shield with it.
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: ell.s on January 16, 2013, 09:19:29 pm
ive got the neuspeed on mine and love it, my mate has the k&n kit and its a lot louder than my neuspeed, im going to custom make a heat shield in stainless although the vent is blasting straight onto the filter and its well away from the engine.
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: jamie_uk on January 16, 2013, 11:22:06 pm
i have a neuspeed  it comes with a nice heat shield good peace of kit for the money
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: ArildStavrum on January 17, 2013, 07:34:33 pm
Neuspeed purchased..
Thanks for your input  :happy2:
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: trs888 on January 18, 2013, 11:24:51 pm
so does the K&N have the whistle of the Neuspeed under hard acceleration?
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: ell.s on January 18, 2013, 11:30:12 pm
It's more of a screech with the typhoon, my neuspeed doesn't whistle anymore to cure it just move the filter on or off the pipe until the harmonic disappears  :happy2:
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: trs888 on January 18, 2013, 11:31:33 pm
i dont know, i kinda like it haha

i do like scaring people with how loud it is  :grin:

anyone got any tips on cleaning the oiled filter?
Title: Re: K&N Typhoon vs Neuspeed P-Flo
Post by: zooms3 on January 20, 2013, 01:47:43 pm
I cleaned my Neuspeed with brake cleaner..... Its no longer red.... :ashamed: but it did clean it very well!! :happy2:

ooops.  :evilgrin: :fighting:

I never have the engine on show so it doesnt really matter!