MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Smudgster on July 08, 2009, 07:52:09 pm

Title: Refurbing Wheel and Milltek advice
Post by: Smudgster on July 08, 2009, 07:52:09 pm

Hi All,

First thing, I havie a badly kerbed Monza 2 and would like it refurbed to factory spec. Can anyone point in the right direction to a good compnay to refurb the wheel please

Second, I have noticed lately that sometimes under very hard  acceleration the exhaust was knocking the floor. on examination the from exhaust mount is the cause. The rubber bushes on the front mount have split and need replacing. Again where would I be able to get these bushes from???

Thanks
Smudge :driver: :driver: :driver: :driver: :driver:

Title: Re: Refurbing Wheel and Milltek advice
Post by: SteveP on July 08, 2009, 07:54:35 pm

Depends where you are located, but if your near the midlands I would go to A1 wheels in Wolverhampton for the Monza refurb  :happy2:

The stealers would be the easiest for the bushes I would think  :smiley: