MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: cxp381 on January 19, 2013, 05:41:17 pm
-
I thought I'd replace my 5 year old DV from a C to a G and followed some excellent instructions from a post on here. However, the penultimate T30 bolt sheared and although I managed to remove it I'm now a little worried. Does anyone know if VW or TPS stock replacement bolts - it's an M6 x 20mm but I definitely don't want to replace it with a similar bolt from the local hardware shop. Any help/advice/experience would be much appreciated.
Thanks.
-
I thought I'd replace my 5 year old DV from a C to a G and followed some excellent instructions from a post on here. However, the penultimate T30 bolt sheared and although I managed to remove it I'm now a little worried. Does anyone know if VW or TPS stock replacement bolts - it's an M6 x 20mm but I definitely don't want to replace it with a similar bolt from the local hardware shop. Any help/advice/experience would be much appreciated.
Thanks.
yes they sell bolts separately. they should only be pennies. any good parts guy will be able to find them for you
-
Great stuff, thanks.
-
i bought a pack of about 6 from halfords the exact size fit etc etc cant remember the price but then atleast your not just buying one you het a few spares etc and its probably cheaper than main dealer
-
I really wouldn't bother going anywhere other than the main dealer for something like this. Probably cheaper and you know the part is the exact type / quality intended for the job.
If my copy of ETKA is to be believed the part number for the bolt is: N 014 740 11, approx 13 pence each.
-
How did you damage it out of interest.
-
I was just unscrewing it and the dome end if the bolt snapped. Luckily I could plier the rest out. A complete freak incident I guess. A little worried though as the dome end of the bolt disappeared into the bottom of the engine bay....I had a good look round but my hope is that it has dropped straight through. New DV in place and tested so peace of mind is restored, and the revision 'C' wasn't in bad condition!
-
Funny how you say dome end. The proper bolt hasn't got a domed head?
Sent from my HTC Desire X using Tapatalk 2
-
Oh, mine do, all 4 of them. Sort of look like this:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fll299%2Fcxp381%2F3ABE0FC6-EC6E-400F-84BD-4DFC34B8CFB4-8662-00000C0D70C4AFEA.jpg&hash=9c2a56c8e7359de680c3d40c8e70f491aa3bc230)
-
There are only 3 bolts.
Those ones look very nothing like mine. Best get 3 real ones from a dealer.
-
Sorry, I meant 4 including the one that attaches the DV to the engine block - same as in this how to guide:
http://www.mk5golfgti.co.uk/forum/index.php/topic,27003.0.html
I'll put a call in to my local dealer tomorrow.
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fv211%2Fstokeballoon%2FNewPicture14.jpg&hash=e1a2d667fccdf9d2e32bfabfa9907a59df5372f7)
Should help the dealer.
-
^^^What a great post :notworthy:
-
Yes, very good post thank you very much!