MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: ell.s on February 15, 2013, 12:28:51 am

Title: RNS 510 Button illumination has stopped working.
Post by: ell.s on February 15, 2013, 12:28:51 am

Got in my car tonight and noticed the RNS 510s buttons weren't illuminated so I tried turning the lights back off and on keys in and our and it got me nowhere is thus a common fault with an easy fix or us my unit buggered?

Title: Re: RNS 510 Burton illumination has stopped working.
Post by: Eddie-NL on February 15, 2013, 01:10:58 am

do the buttons work?
have you recently updated the firmware?

Title: Re: RNS 510 Burton illumination has stopped working.
Post by: ell.s on February 15, 2013, 05:36:21 am

Yes everything seems to work, no not recently probably about 3 months ago but all has been fine till now.

Title: Re: RNS 510 Burton illumination has stopped working.
Post by: Eddie-NL on February 15, 2013, 05:32:06 pm

the car sends a signal to switch the illumination Terninal 58D

Does your RNS have Test / Development mode (press and hold SETUP for about 30 seconds)
I think if you go into there and select CAN it should show you if the RNS is receiving the signal

Title: Re: RNS 510 Button illumination has stopped working.
Post by: V6nutter on November 27, 2016, 08:48:57 am

Hi - did you get this issue resolved? Im having the same problem.

Title: Re: RNS 510 Button illumination has stopped working.
Post by: V6nutter on November 27, 2016, 09:39:05 am

Results from CAN menu

Speed Signal 0km/h
CAN Reversing off
KL15 on
KL58 d 94%
S-Kontact on
Mute bit off
Analog mute off
Mute Value 0
 
Do these look ok?