MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: karl210 on February 19, 2013, 10:48:55 am

Title: just fitted my wonky milltek..
Post by: karl210 on February 19, 2013, 10:48:55 am

Fitted my Milltek catback last night and it seems to hang a bit low and a bit wonky, any ideas? ive tried the bend the right tailpipe up but its pretty strong, is anybody elses like this?
(https://lh6.googleusercontent.com/-nixmjIGGpKQ/USNXvLP3OXI/AAAAAAAAAD0/aTpU2BPXUi8/s500/2013+-+1)

Title: Re: just fitted my wonky milltek..
Post by: PSW on February 19, 2013, 12:01:49 pm

^^^
sell it and buy a BCS ...... :innocent:

Title: Re: just fitted my wonky milltek..
Post by: jimojameso on February 19, 2013, 12:56:34 pm

I can't see your picture as im at work but my milltek used to it perfectly!!  :confused:

Title: Re: just fitted my wonky milltek..
Post by: DFish on February 19, 2013, 01:04:20 pm

Plastic hammer would fix that.

Fish

Title: Re: just fitted my wonky milltek..
Post by: andybon on February 19, 2013, 05:06:14 pm

 Slacken the joint on the backbox and twist the backbox until it sits right in the hole, had similar problems when I've fitted them in the past.

Title: Re: just fitted my wonky milltek..
Post by: karl210 on February 19, 2013, 10:12:11 pm

cool il give it a go cheers. I put a block of wood between the left pipe and the heatshield then i put a long bar in the right one and tried to jig it up a bit but there bloody strong!