MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: camfollower on March 03, 2013, 12:38:09 pm
-
Most of them are nice and easy, the fuel switch is a bit of PITA, but partially removing the door card and fitfrom beneath... Everything works fine, but thought I would do a quick VCDS scan, and it comes back with:
==
1 Fault Found:
00096 - Drivers Door Central Locking (Safe) Motor (V161)
012 - Electrical Fault in Circuit - Intermittent
==
:confused:
There were no errors before installation...
I wiped the error and rescanned and it returned.
The central locking is fine too.. :rolleye: do you think this could be down to the switch pack, or has removing the door card disturbed something?
-
Hopefully you've just disturbed a wire or connector. Take the door card off and check everything.
Otherwise the door lock mechanism may be on a limited lifespan.
-
Thanks. Yes hopefully it's something simple, and it's a bit of a coincidence I suppose.
For anyone looking in it's on VCDS wiki as: http://wiki.ross-tech.com/wiki/index.php/00096