MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: northyracing on April 29, 2013, 03:48:38 pm

Title: DIY injector change
Post by: northyracing on April 29, 2013, 03:48:38 pm

As title says has anyone done a DIY on this job or is it that hard of a job that its best letting vw do it

Title: Re: DIY injector change
Post by: dokez on April 29, 2013, 04:41:45 pm

Its straight forward. Just removing the nuts/bolts off the inlet manifold as that has to come off first.

Title: Re: DIY injector change
Post by: Saintsteve on April 29, 2013, 04:55:53 pm

I was told an injector pulling tool may be required to do this?

Someone may confirm this?

Title: Re: DIY injector change
Post by: dokez on April 29, 2013, 04:56:44 pm

http://www.vagfans.com/forum/viewtopic.php?f=4&t=161

Title: Re: DIY injector change
Post by: northyracing on April 29, 2013, 05:28:07 pm

To be fair that don't look that bad of a job might have to look into doin this just so I can diagnose if the injector is my problem

Title: Re: DIY injector change
Post by: northyracing on May 01, 2013, 07:44:59 pm

Can anyone tell me exactly what parts I need e.g gaskets etc also any part numbers would be ideal

Title: Re: DIY injector change
Post by: bacillus on May 01, 2013, 10:33:04 pm

You will need an injector repair kit for each injector you remove.

Part number 06D 998 907

Title: Re: DIY injector change
Post by: Saintsteve on May 02, 2013, 07:28:13 am

Quote from: bacillus on May 01, 2013, 10:33:04 pm

You will need an injector repair kit for each injector you remove.

Part number 06D 998 907

Inlet manifold seal kit also.

Title: Re: DIY injector change
Post by: northyracing on May 02, 2013, 07:38:55 am

So I will need injector, repair kit and inlet manifold gasket

Title: Re: DIY injector change
Post by: bacillus on May 02, 2013, 07:59:25 am

Quote from: northyracing on May 02, 2013, 07:38:55 am

So I will need injector, repair kit and inlet manifold gasket

Yup.

Title: Re: DIY injector change
Post by: northyracing on May 02, 2013, 08:30:09 am

Cheers mate I just thought I needed just a new injector and inlet gasket

Title: Re: DIY injector change
Post by: edd666999 on May 02, 2013, 09:26:48 am

Doesnt look that difficult  :pomppomp:

Title: Re: DIY injector change
Post by: northyracing on June 08, 2013, 08:16:40 pm

Can't seem to find an injector to fit the axx engine have I got to get one that's just fits the axx of can you use another engine code injector also when I change them will I have to code them or is it a straight forward swap over