MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: mtj2k on June 21, 2013, 02:42:16 pm

Title: Fitting a MF Steering Wheel
Post by: mtj2k on June 21, 2013, 02:42:16 pm

Hi all,

Just bought a new Steering wheel of the Bay [ebay]141001563190[/ebay]  :driver:

Currently have a 2007 'round' wheel without buttons...

Have the new Control Module ready to rock n roll but i need the Airbag Wiring Harness.

Does anyone have any advice to figure out which one i need? 1K0-971-584 C, K, L??? Single ignite / dual ignite? IDK  :confused:

Title: Re: Fitting a MF Steering Wheel
Post by: RetroRaz on June 21, 2013, 02:48:39 pm

i was watching that on ebay today. Good purchase mate,

Title: Re: Fitting a MF Steering Wheel
Post by: mtj2k on June 21, 2013, 03:14:17 pm

Been wanting one for years, but never seem to be below £250-£300, this was too good to miss on (just havn't told the missus yet!)

Title: Re: Fitting a MF Steering Wheel
Post by: SI-R32 on June 21, 2013, 03:31:29 pm

dual ignite airbags were only used for the american market,

the part number you will need is 1K0971584C

Title: Re: Fitting a MF Steering Wheel
Post by: mtj2k on June 21, 2013, 03:43:54 pm

Top  :happy2:

thanks for your help

.... now just have to wait for postman!

Title: Re: Fitting a MF Steering Wheel
Post by: mtj2k on June 21, 2013, 03:48:28 pm

Stealer wants £45 for harness  :surprised:

Title: Re: Fitting a MF Steering Wheel
Post by: holty on June 21, 2013, 03:49:13 pm

Just PM'd you - got a brand new unused one here.

Title: Re: Fitting a MF Steering Wheel
Post by: mtj2k on June 21, 2013, 04:28:01 pm

Sorted -  :happy2: