MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: Gaz on August 08, 2013, 11:02:42 pm

Title: Does Pipe Werx downpipe fit onto Milltek System?
Post by: Gaz on August 08, 2013, 11:02:42 pm

I have a Milltek resonated cat-back system and its near silent so i was going to fit a non-resonated centre. Then i thought i could use a pipe werx decat downpipe and fit to the Milltek, hopefully that will make it slightly louder whilst improving the exhaust for power?

So keep my resonated Milltek with a Pipe werx decat, will this sound good, and most importantly will they fit together?

Thanks!

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: E30Dom on August 09, 2013, 09:16:42 am

Should do, mine fitted onto my BCS 3" cat back exhaust no probs...

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: Gaz on August 09, 2013, 01:51:34 pm

Thanks, are they all made to the same sort of length so the joint is always in the same place regardless of make? Does yours just use a 3" sleeve to join them, or one part of your exhaust slide inside the other?

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: berg on August 09, 2013, 04:12:20 pm

Quote from: Gaz on August 09, 2013, 01:51:34 pm

Thanks, are they all made to the same sort of length so the joint is always in the same place regardless of make? Does yours just use a 3" sleeve to join them, or one part of your exhaust slide inside the other?

Ring Jeff at pipewerx if unsure

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: Gaz on August 13, 2013, 10:24:52 am

Sorted, ive spoke to Jeff and hes making me one without the reducer to fit a standard exhaust and im getting an adaptor to fit the Milltek! Will be made today or tomorrow and here by Thursday before it gets stage 2 mapped on Friday.  :happy2:

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: DAZ1985 on August 14, 2013, 08:54:40 am

How much was it gaz?

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: Gaz on August 14, 2013, 09:02:26 am

Theyre £275 via theyre online Ebay shop, but i aske if they could match Awesomes price of £235 if i paid outside Ebay.

Jeff said they make Awesomes ones in 7-8 days, where as buying direct he was doing it within 2 days!

He did it for £250 delivered outside Ebay, so £15 more to have it done quickly, and £10 for a joining piece to fit Milltek.

 :happy2:

Title: Re: Does Pipe Werx downpipe fit onto Milltek System?
Post by: berg on August 14, 2013, 04:59:43 pm

Quote from: Gaz on August 14, 2013, 09:02:26 am

Theyre £275 via theyre online Ebay shop, but i aske if they could match Awesomes price of £235 if i paid outside Ebay.

Jeff said they make Awesomes ones in 7-8 days, where as buying direct he was doing it within 2 days!

He did it for £250 delivered outside Ebay, so £15 more to have it done quickly, and £10 for a joining piece to fit Milltek.

 :happy2:

Top chap Jeff, knows his onions from when he built all the Dubsport creations over the years. Running a nice RS4 Avant himself at mo, sounds  :sick: