MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Veee-dubber on August 20, 2013, 07:49:32 am
-
Hey all.
I am looking to order my new alloys this week and was wondering what else I will need to complete the set up, the rears are 9.5J so I'm wondering what else I will need to set up without any issues?
1) What is optimal stretch? - I don't want anything daft & I know this raises lots of opinions but i'm looking at it from a purely functional reason i.e elliminating any rubbing.
2) How low can I go? - Car is not lowered as want to do this all in one hit to get it right, how low will I be able to go? again nothing and must be functional.
3) Do I need to run negative camber?
4) Do I need to do the arch screw mod?
5) Do I need to consider anything else?
Sizes of my new alloys are as follows:
2 X 18X8.5, ET 35, PCD 5 X 112, CB 72.6
2 X 18X9.5, ET 35, PCD 5 X 112, CB 72.6
Would really appreciate any help guys, I know a fair few of you guys run 9.5J rears, what issues if any have you had?
Cheers :happy2:
Chris.