MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: DAZ1985 on August 27, 2013, 07:49:40 pm
-
Can anyone confirm that if my car is 07 plate and I have the diagnostic wire going into the control module then I only require the stalk and coding on vag com to make it work? 1KO 953 513 with no additional cable
-
Mine had the wire on a 07 plate Edition 30 :happy2:
-
My 56 plate had the wire, according to a VW dealer I spoke to, all had it after 2006 - not sure how correct this is though
-
Pretty sure my 06 had the wire - when I had the retrofit done it was pretty easy apparently...
-
Thanks for all the replies :happy2:
-
Can anyone confirm the part never of the stalk?
-
My 07 was plug & play (with VCDS coding). I went with the G part no (cant remember the rest of it) - i'm told the earlier revisions can fail :happy2:
-
If you end up with a spare wire let me know :happy2:
-
my 08 gt had the wire so just fitted stalk & coded
-
Vw are trying to sell me the full kit with the wire.
Which I don't need
-
Sell it too me :grin:
-
All being well I should be fitting it Saturday. If the cables spare (which I'm guessing it will be) then I can sell it to you Rumple
-
Cheers mate, gonna try and bodge it on saturday too so if that fails and the cable is spare will definitely have it off you! :happy2:
-
Can anyone confirm that if my car is 07 plate and I have the diagnostic wire going into the control module then I only require the stalk and coding on vag com to make it work? 1KO 953 513 with no additional cable
Eddie-NL is the cruise control man , He will know exactly what you need and is always helpful
-
Can anyone confirm that if my car is 07 plate and I have the diagnostic wire going into the control module then I only require the stalk and coding on vag com to make it work? 1KO 953 513 with no additional cable
Eddie-NL is the cruise control man , He will know exactly what you need and is always helpful
+2....he did two of my golfs
-
Can anyone confirm that if my car is 07 plate and I have the diagnostic wire going into the control module then I only require the stalk and coding on vag com to make it work? 1KO 953 513 with no additional cable
Eddie-NL is the cruise control man , He will know exactly what you need and is always helpful
+2....he did two of my golfs
He can do it blindfolded,no joke
-
Managed to do it today. Not too bad of a job once you find the hidden clips on the module.
I didn't need the wire either which saved abit of time
Had a scare moment when the steering position sensor showed a fault but after reset it, all was good
1K0 593 513 G
-
:drinking: for the replies again though