MK5 Golf GTI
		All Things Mk5 => Mk5 General Area => Topic started by: M7AXB on September 03, 2013, 10:11:37 am
		
			
			- 
				Hi all,
Quickly tried to fit my ITG intake last night and ran into a couple of issues. 
How do you get the heat sheild to fit? The instructions said about rubber grommets but, i don't seem to have them?
It also seems very tight at the 90 degree bend at the battery, is this normal?
Was missing a jubilee clip too so had to put the old intake back on until the new one arrives  :sad1: 
Cheers
			 
			
			- 
				From what I've read you use the rubber grommets from under your engine cover.
			
 
			
			- 
				Yeah just use your rubber ones from the oem engine cover mate. 
			
 
			
			- 
				If you have to undo the black plastic engine cover mounts, they have a nut on the underside so they will not undo without removing this first
			
 
			
			- 
				Ah forgot about the rubber grommets attached to the engine cover, cheers :happy2:
			
 
			
			- 
				
If you have to undo the black plastic engine cover mounts, they have a nut on the underside so they will not undo without removing this first
I chewed he'll out of mine till I eventually realised the nuts underneath as the front 2 just screw in  :fighting:
			 
			
			- 
				I found out the same way. I thought no way theses can be this tight lol
			
 
			
			- 
				It also seems very tight at the 90 degree bend at the battery, is this normal?
I thought exactly the same when i fitted mine but everyones seems the same :jumpmove: