MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: loon on September 28, 2013, 05:00:01 pm
-
hi ,
I own a mk 5 gt tdi,it has leather gti seats fitted (by previous owner).
i was wondering if someone could help me with how to get the electric lumber support to work,or is this not possible.
my car is a 04 plate
I do have vcds ,but unsure if that would be the only item needed to get this working, ive looked under the drivers seat and all the wiring seems right,
could someone shed some light on this
best regards and thanks in advance
ps great forum by the way
glad to be here
-
anyone willing to help?
cheers
really would like the lumbar support to work on these seats
-
VCDS isn't needed for lumbar support, are you sure he retrofitted the seat wiring loom or is there a big rectangular plug free underneath?
If all been done properly, check the fuse. I think lumbar just needs a 12v and earth to work but I don't have a pinout to tell you what wire's what
-
IIRC lumbar only needs power and a ground. A member on here completed this successfully and posted a thread with some useful pictures, might be worth a search.
-
IIRC lumbar only needs power and a ground. A member on here completed this successfully and posted a thread with some useful pictures, might be worth a search.
any idea as to how to word my search, as ive used the search function, but been fruitless in my search for info
thanks for your help
-
Try this post http://www.mk5golfgti.co.uk/forum/index.php/topic,38242.msg456475.html#msg456475,
If I recall from doing it the red/white was power. I would double check your fuse again too.
-
Try this post http://www.mk5golfgti.co.uk/forum/index.php/topic,38242.msg456475.html#msg456475,
If I recall from doing it the red/white was power. I would double check your fuse again too.
thanks very much