MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: M7AXB on October 07, 2013, 11:23:51 pm
-
Hi all!
Just bought a nearly new turbo to fit to my eddy.
It all looks okay except one on the hose connectors is broke as per pic
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Faf118%2Fmaximillion1990gti%2Fimage-2.jpg&hash=322a857adb28014fcb69b66c9b034872f76b2c41)
Would i be able to just swap over the bit easily of my old ko4? Tried to contact seller but, no reply yet as a bit unfair saying in very good condition when I'm going to have to get this fixed now too. Having no luck ATM :sad1:
-
They are very fragile. One little knock and it breaks. Use the n75 from your old turbo.
So was it something going into the turbo that caused the issue?
-
Yes mate, you were right :notworthy:. I bought a second hand ITG that was half assembled and just fired it on. When I took it all off to look into it further i found a bolt inside :scared:
Is it easy to switch over the n75? I'm not wanting charged a fortune in labour by this garage.
Cheers