MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: golfgti10 on October 22, 2013, 11:20:37 pm
-
ive been told these will be fine im going from standard 17s to 18s with ET42 so they will poke by more than 12mm will that be fine or to close to the arches??? really worried as ive already order the wheels
-
You need to know the width of the wheel as well....
http://www.mk5golfgti.co.uk/forum/index.php/topic,72922.msg775519.html
-
They are 18x8 5x112 et42 with 66.6cb
tyre size: 225/40/18
-
interested in an answer to this...
:happy2:
-
They are 18x8 5x112 et42 with 66.6cb
tyre size: 225/40/18
Should be no problem around 15mm more poke than a monza. :happy2:
-
What happens when I drop 30mm ?
-
I'm all the way down on ap coilovers and have 8" front 9" rear, both et42. No probs. tyres are 225/40/18
-
They are 18x8 5x112 et42 with 66.6cb
tyre size: 225/40/18
You will be fine on JOMS or AP coils or lowering springs.
You need spigot rings to take you to 57.1
-
Anyone know the standard et on 16" classix that came on the gt sport....
-
They are 17s and the ET is 51 or 54.
-
They are 18x8 5x112 et42 with 66.6cb
tyre size: 225/40/18
you will need a centreing ring, mk5 chassis cb is 57.1 :happy2:
speedline turini by any chance?
-
http://i.ebayimg.com/t/audi-speedline-19-x9-5x112-ET52-fit-vw-audi-seat-skoda-/00/s/MTIwMFgxNjAw/z/EWIAAOxyLiJR3oOW/$T2eC16N,!ygE9s7HHqLLBR3oOVz3T!~~60_35.JPG
replica of these???
-
I had these exact spec on mine, and it had a reasonable drop. They'll need the screw mod (search for it) but will be ok. :happy2:
-
what is the screw mod and will I def. need it
-
Search for it..? As above..
It's where you remove a screw and bend a tab in the upper wheel arch out of the way.