MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: BLUE-STORM on October 29, 2013, 06:49:51 pm

Title: what is the difference
Post by: BLUE-STORM on October 29, 2013, 06:49:51 pm

can any one tell me the difference between theses two part numbers :

06f 906 036f

and

06f 906 036g

both are injectors     is the   G   for a GTI  and the F   for a S3 ???

Title: Re: what is the difference
Post by: rich83 on October 29, 2013, 06:53:33 pm

S3 flows more than the normal GTI.... someone clever will be able to tell you the exact spec.

Title: Re:
Post by: joelee on October 29, 2013, 07:31:33 pm

I am sure the s3 one is bigger od than the gti one

Sent from my HTC One using Tapatalk

Title: Re: what is the difference
Post by: bacillus on October 29, 2013, 07:34:18 pm

06f 906 036f is definitely a S3 injector that flows about 15% more than the standard FSI injector.
iirc ed666999 had 06f 906 036g injectors installed with his k04 conversion.

Title: Re: what is the difference
Post by: doylebros on October 29, 2013, 07:53:55 pm

G dropped to supersession to 06F 906 036 A which is used in both VW & Audi

However, it depends on which engine for example

A and F  can be found in both VW & Audi but it chassis number dependant as to when.

>>1K-6-190 000 is Ending in A for engines AXX,BWA,BPY

1K-6-190 000>> is Ending in F for engine BYD

When fitting required complete with repair kit 06D 998 907

Information from ETKA7.4

Title: Re: what is the difference
Post by: BLUE-STORM on October 29, 2013, 10:33:22 pm

ive just had a k04 set up fitted and 06f 906 036f injectors fitted , my old ones were the 06f 906 036g ones ,  so was jsut wondering if i needed to change them at all

Title: Re: what is the difference
Post by: rich83 on October 29, 2013, 10:54:52 pm

Well... if F injectors are on the Ed30 and you are running K04.. then they will be fine.