MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Andy1994 on November 02, 2013, 08:34:57 pm
-
Scanned car with vagcom no codes!, scanned car with launcg diagnostic and had a code for "refrigerant pressure low". Checked the system which was full and no leaks so replaced the pressure sensor rechecked and no codes however i still dont get cold air and the fans dont come on but, when i press the econ button to either turn on or off the revs do fluctuate at idle as if its working so can shed some light on what my problem is
-
Use VCDS to run an output test, then use measuring blocks to run the fans & check compressor current see what you find.
-
is this easy enough to do?
-
Pressing buttons - watch a few videos on you tube using VCDS
-
Il give it a go only ever used it for checking codes is there anything else i should be cheking?
-
Just start like I said watch YouTube but don't change anything just take the reading and you'll be fine :wink: