MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Alex156 on November 30, 2013, 10:04:03 pm
-
Hi,
Have just purchased an rcd310 to replace the rcd300 in my 2007 mk5 GTI. I know an antenna adapter is required and I have ordered one but unfortunately it hasn't arrived in time and the time I have to fit everything is tomorrow. Does anyone have a DIY for how to do this with parts of the shop from a shop that would be open on a Sunday. At the minute I'm thinking speaker wire and an assortment of connectors plus insulating tape to hold in place.
Any suggestions appreciated?
Thanks!
-
if you just take the outer housing off the connectors they will pop on, bit of tape to keep them secure may suffice... :happy2:
-
Worked a treat, thank you!
-
Just taped them?
eBay do the connectors for around a fiver.