MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: George10 on December 09, 2013, 08:04:36 pm

Title: Gti miltek (r32 style) on a tdi
Post by: George10 on December 09, 2013, 08:04:36 pm

Will this fit straight on? I see loads of people doing it, but was just curious.
All comments could be min appreciated.

George

Title: Re: Gti miltek (r32 style) on a tdi
Post by: Andy on December 09, 2013, 08:26:47 pm

They fit on a tdi with a adaptor pipe so will fit a gti

Title: Re: Gti miltek (r32 style) on a tdi
Post by: G40will on December 09, 2013, 08:58:16 pm

Yes it will fit.

Title: Re: Gti miltek (r32 style) on a tdi
Post by: George10 on December 09, 2013, 09:30:12 pm

Is it literally a straight swap?

Title: Re: Gti miltek (r32 style) on a tdi
Post by: G40will on December 09, 2013, 09:47:08 pm

I've not done it myself but I would imagine it is yes, you will need a sleeve/ reducer pipe but it will just go straight on other than that.

Just get it done and man up!

Title: Re: Gti miltek (r32 style) on a tdi
Post by: George10 on December 09, 2013, 09:58:31 pm

 :signLOL:

It's all booked in for tomorrow man

Title: Re: Gti miltek (r32 style) on a tdi
Post by: Andy on December 09, 2013, 10:34:42 pm

 :happy2:need  pics when done

Title: Re: Gti miltek (r32 style) on a tdi
Post by: Llew on December 10, 2013, 01:44:45 am

I think you,ll find it's not a straight swap and adjustments will be needed as tdi from the backbox curves to nearside then to the middle whereas r32 runs straight down the middle -something is in the way on a tdi why it cannot be run straight
Have a look at this miltek made for tdi and you'll see what I mean
http://www.ebay.co.uk/itm/Milltek-R32-Style-Cat-Back-Exhaust-System-Volkswagen-Golf-Mk5-2-0-TDI-140PS-/280738756861?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item415d5578fd

Title: Re: Gti miltek (r32 style) on a tdi
Post by: George10 on December 10, 2013, 09:52:47 am

It's not an r32exhaust , it's a gti shaped exhaust with the r 32 exit