MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Technical Workshop => Topic started by: Gti Jal on September 20, 2009, 05:13:29 pm

Title: Help fitting Cruise - Slough area
Post by: Gti Jal on September 20, 2009, 05:13:29 pm

Hi Fella's,

Can anyone with VAG COM help me with fitting cruise around slough?

Thanks,
Rik.

Title: Re: Help fitting Cruise - Slough area
Post by: vRStu on September 20, 2009, 06:38:44 pm

Not perfectly local but Hedge has VCDS if you're willing to travel.

Failing that look at the list of owners in the VCDS forum.

Title: Re: Help fitting Cruise - Slough area
Post by: Gti Jal on September 20, 2009, 10:10:33 pm

Thanks - I'm going to put it in and then see if I can get some help with VAG COM.

Title: Re: Help fitting Cruise - Slough area
Post by: Poppa Dom on September 20, 2009, 10:35:33 pm

I'm close to M4 J11.

Title: Re: Help fitting Cruise - Slough area
Post by: Gti Jal on September 20, 2009, 10:53:07 pm

Hi Dom,

I'll get it installed and if ok with you give you a shout via PM

Title: Re: Help fitting Cruise - Slough area
Post by: vRStu on September 21, 2009, 03:47:06 am

Be careful with the steering controller when you remove it.  You'll likely get a steering wheel warning on the dash when you put it back together, just drive a few yards in a straight line and it will clear.

Title: Re: Help fitting Cruise - Slough area
Post by: Poppa Dom on September 21, 2009, 08:13:17 am

That's fine -just give us a PM as and when. Stu - got any coding guidance?

Title: Re: Help fitting Cruise - Slough area
Post by: vRStu on September 21, 2009, 12:43:55 pm

Assuming it's a GTi then it's ECU Long Coding and Steering Controller if it's a TDi then it's ECU login (11463) and Steering Controller.