MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: mk_boy85 on February 16, 2014, 10:19:06 pm

Title: Making a gen 2 Haldex system work in my golf
Post by: mk_boy85 on February 16, 2014, 10:19:06 pm

Hi I'm really struggling to source parts to make a gen 2 system work without the oe wiring or I have diagrams and have the relevant hardware installed and require someone to wire it. Can anyone help with either solution !!!


Sent from my iPhone using Tapatalk

Title: Re:
Post by: SI-R32 on February 16, 2014, 11:05:28 pm

A location might help for anyone wanting to volunteer?

Title: Re: Making a gen 2 Haldex system work in my golf
Post by: vRSAlex on February 16, 2014, 11:21:45 pm

Iirc it's only 5 wires. I have diagrams and I can get plugs and wires.

Title: Re: Making a gen 2 Haldex system work in my golf
Post by: mk_boy85 on February 17, 2014, 05:46:27 am

Quote from: SI-R32 on February 16, 2014, 11:05:28 pm

A location might help for anyone wanting to volunteer?

Hi I'm in Swadlincote/Derbyshire. I'd quite happily bring the car to someone or they could travel to me and I'd pay for accommodation etc if it's a fair way, just want it done now


Sent from my iPhone using Tapatalk

Title: Re: Making a gen 2 Haldex system work in my golf
Post by: mk_boy85 on February 17, 2014, 05:49:06 am

Quote from: vRSAlex on February 16, 2014, 11:21:45 pm

Iirc it's only 5 wires. I have diagrams and I can get plugs and wires.

Thanks it would be nice to look at the wiring and get the plugs. I have a small loom with two plugs from the controller. I'm just not that confident with it and I'll need someone to code it in via vag com of which I don't have easy access too nor understand.




Sent from my iPhone using Tapatalk