MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: seanieb on March 03, 2014, 04:10:07 pm
-
Today i changed my cam follower and also installed a pipercross panel filter. Then management light is now on and wont go out :confused:
I plugged the maf sensor back in after although i did run the car with no maf on for a minute.
would this cause any issues?
-
Unplugging the maf and running it will throw a code on but I would have thought it would cleR on e it recognised it was back on
-
No.
MAF unplugged gives ESP light.
scan the car..
-
Ahh. Here's and idea now you added that. Straight to VW tell them the light has come on since they did the coiloacks. Don't mention the cam follower or other things you did after. A bit naughty I know but a free scan is worth it.
-
car is in for a map wednesday and im worried they wont map it if the light is on?
forgot to mention it also had coil packs done at vw this morning but all was fine until i touched it lol
A decent tuner will scan for codes before mapping!