MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: Alzak on March 04, 2014, 12:54:06 pm
-
Hi All
Will 370mm discs and brakes from RS3 fit behind 18Inch alloys in Seat Leon Fr ?
-
Think you need the ttrs discs, as the rs3 ones needs rs3 bearings !
-
Think you need the ttrs discs, as the rs3 ones needs rs3 bearings !
That is correct, 10mm wider bearings to my knowledge, you need the TT-RS discs to get it to work
-
U will need ttrs discs
Part no 8j0.615.301E
-
After that you could still need to run 10 mm spacers on the front ! :happy2:
-
Is there any visual difference between RS3 discs and TTRS ?
-
Part numbers !
-
I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though :fighting:
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fb9rgo1234%2FLeon_mk2%2FDSC_0359.jpg&hash=87522d251e43d5105e5534cfb3f0bf47ec7fb3f7)
-
Those look amazing :drool: :drool: May have to trade my r32's in for some rs3 calipers.
-
I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though :fighting:
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fb9rgo1234%2FLeon_mk2%2FDSC_0359.jpg&hash=87522d251e43d5105e5534cfb3f0bf47ec7fb3f7)
I have oryginal FR 18Inch alloys and I believe they have offset ET45 ...
You mantioned some fitting kit do you have any link where I can see it ?
-
I had TTRS brakes fitted to my Leon with 18" Seat Sport BBS alloy 7.5" ET51 and had to use a 12mm spacer.
The caliper actually rubs on the inside of the alloys though :fighting:
I plan on using the calipers again but with the fitting kit so I can use TTS 340mm discs.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fb9rgo1234%2FLeon_mk2%2FDSC_0359.jpg&hash=87522d251e43d5105e5534cfb3f0bf47ec7fb3f7)
I have oryginal FR 18Inch alloys and I believe they have offset ET45 ...
You mantioned some fitting kit do you have any link where I can see it ?
Aks do the fitting kit for rs3/ttrs calipers fitting to r32 discs or if u want a bigger setup then u can go for the daveb ttrs discs with fitting kit,benefits of the daveb kit is that the discs sits inner(around 4-5mm)& the disc is 32mm compared to 34mm,so u might can get away on not using spacers..not cheap though
-
I got them behind my monzas with a 10mm spacer
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fpd9264%2FMobile_Uploads%2Fimage_zps3264fc49.jpg&hash=47ce83ddb375ab9e8c173ac49154a4454cd96611)
-
So will that be similar to Pescaras then?
-
I risked 12.5mm spacers behind my pescaras and they just, just fitted!! Had to remove the wheel weights because they were rubbing on the caliper.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fs298%2Fdav_100%2Fimage-14.jpg&hash=b7ff6a53c3b290d342ec240c7fc4e65f7b11bd4a)
-
I'm thinking of ttrs calipers with ttrs 370mm discs so basically the ttrs setup on my golf R...been reading on American forums that I will need a 10mm spacer to clear the calipers if im running on oem 19x8 tallies but I'm worried that I might get rubbing as I'm lowered on H&R springs...
-
I've read that the TTRS discs are very poor quality.
-
There not the best but they seem to work alot better than my standard gti ones
-
Anyone ran them with 17" monzas
-
It's impossible, 18s at a minimum, 19s would be recommended.
-
Anyone ran them with 17" monzas
I think the discs are too big for 17"s
U would need 18"s min mate