MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Gasman on March 15, 2014, 03:05:34 pm

Title: How low can I go?
Post by: Gasman on March 15, 2014, 03:05:34 pm
I'm not keen on my current stance and want to go a little bit lower especially on the rears.  I don't want it slammed but I would like there to bit little or no gap between the top of my tyres and arch.  I'm on 19"s however the arches were rolled by the previous owner I believe.   I'm not sure of the width and offsets of my wheels.  Would I get away with a 30mm drop all round?

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fnn115%2Fbowgs%2Fimage-23.jpg&hash=133df93852099f5e571106fbb1a5bc751de80bd3)

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fnn115%2Fbowgs%2Fimage-24.jpg&hash=e29db11b5ef95dd87fec1d0edf7ef86aee7a2c12)

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fnn115%2Fbowgs%2Fimage-26.jpg&hash=a33b0de113f8d67b7067dcba7077ef212979fb23)
Title: Re: How low can I go?
Post by: JoeDarKa on March 15, 2014, 03:07:36 pm
You need to find the specs of your wheels first. Should be ok though
Title: Re: How low can I go?
Post by: Gasman on March 15, 2014, 03:12:21 pm
Ok mate ill whip em off and have a look at the markings.  This is the look I'd like..

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fnn115%2Fbowgs%2Fimage-29.jpg&hash=6ee77dd2e4db887b65a642ab55f8f49446609ce0)
Title: Re: How low can I go?
Post by: JoeDarKa on March 15, 2014, 03:13:35 pm
Then you will need coilovers  :wink:
Title: Re: How low can I go?
Post by: biffobear on March 15, 2014, 03:49:45 pm
I had to fit coilovers to get that stance. Plus had to remove adjusters on rear
Title: Re: How low can I go?
Post by: George10 on March 15, 2014, 07:59:02 pm
As above^^ if I were you if roll your front archers to sit like that.
Title: Re: How low can I go?
Post by: DanMaytee on March 15, 2014, 09:23:45 pm
I'm on 19's (8.5j Et45 215/35 tyres) and mine fit perfect.  On the rear though I've cambered them to -2.5 degrees and added a 5mm spacer.  The fronts I haven't done anything to apart from the screw mod (http://www.golfmkv.com/forums/showthread.php?t=10909&highlight=fender+screw+mod (http://www.golfmkv.com/forums/showthread.php?t=10909&highlight=fender+screw+mod)).  I rub slightly on the arch liner if I corner hard but it's never caused any damage and I do like to hoon it around sometimes.  I'm guessing your wheels will be around a similar spec as mine so hopefully this will have helped.  If you whip a wheel off you might have stamped the ET on the barrel :).

Quick photo for reference (It's a Jetta but it's the same as a Golf)

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fi402%2Fdanmaytee90%2FDSC_1441_zps94c3b289.jpg&hash=ab5ee372b268ec79f304b9d026bdc210380b2833)
Title: Re: How low can I go?
Post by: Gasman on March 16, 2014, 06:22:41 pm
I had to fit coilovers to get that stance. Plus had to remove adjusters on rear

Are you on 19's?
Title: Re: How low can I go?
Post by: Gasman on March 16, 2014, 06:23:02 pm
As above^^ if I were you if roll your front archers to sit like that.

They've been rolled  :happy2:
Title: Re: How low can I go?
Post by: George10 on March 17, 2014, 10:30:31 am
You should be fine then  :happy2: