MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Airz182 on April 14, 2014, 08:16:57 pm
-
Tried to drop my car a little bit more tonight, after abit of heat and alot of banging, ive managed to undo the bottom locking collar on my front coilovers, but the collars that sit under the springs is seized solid,
Im after replacment collars, as im going to have to cut these ones off now
-
Seen these on ebay, i know there bilstein, just wondering if these would fit the fk
230920148555
-
Bump
-
Drop dpm performance an email, really helpful from my experience and may be able to help out.
-
Thanks will have a look now
-
Tried them mate, helpful but no luck!
-
If you get in contact with fk and explain what part you need from what kit they will be able to sell you just that. I had to cut a collar off a previous set of coilover and got a replacement collar for around about £25 with postage from Germany ofcourse.
-
Emailed them twice with no reply
-
Emailed them twice with no reply
Is there a phone number to ring?
-
Going to ring fk tomorrow, only a international number i can see on there site,
Going to ring venom as i read they sell them aswell around £10 each
-
Has anybody seen these type of lockrings
http://www.fk-shop.de/en/Suspension-Tuning/Coilovers-Accessories/Locking-ring-with-shear/Locking-rings-for-coilover-suspension-Set-of-2-oxid-1.html
Just wondered how they work? As i Carnt see a thread inside the collar.
I dont see how just clamping it in place would hold work!!