MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: Rob GTI on October 15, 2009, 07:54:07 pm

Title: RNS510 Security code and volume control issues
Post by: Rob GTI on October 15, 2009, 07:54:07 pm

Just had my RNS510 delivered and have discovered the following issues:

1. The volume cannot be adjusted, it is set to a very low level and will not turn up or down, (the mute symbol is displayed on the screen as well).
2. The unit asks for the security code each time I power the unit on.


The unit appears to be firmware revision A.

Any ideas?
   

Title: Re: RNS510 Security code and volume control issues
Post by: SteveP on October 15, 2009, 08:07:24 pm

Have you got a bluetooth car kit installed?

Title: Re: RNS510 Security code and volume control issues
Post by: Rob GTI on October 15, 2009, 08:26:20 pm

No just the RNS510, I have tried another one in the car before (Rev B FW) and that worked fine.

Title: Re: RNS510 Security code and volume control issues
Post by: JPC on October 15, 2009, 08:59:34 pm

Rob, take the unit out, turn it round and make sure all the pins are straight and haven't been bent during installation. You might have a short causing the unit to think it's receiving a mute signal from that pin

Title: Re: RNS510 Security code and volume control issues
Post by: Rob GTI on October 16, 2009, 09:44:16 pm

The pins weren't damaged, but after I left the unit for an hour or so after posting the problems they rectified them all by themselves??? and have been fine ever since.

Title: Re: RNS510 Security code and volume control issues
Post by: Jamerson on January 21, 2012, 10:31:54 pm

Quote from: Rob GTI on October 16, 2009, 09:44:16 pm

The pins weren't damaged, but after I left the unit for an hour or so after posting the problems they rectified them all by themselves??? and have been fine ever since.

i remeber i had the same issue with my B unite, but after couple of hrs it fix it self,
someone the parts need to see each others,