MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Kalpesh on May 31, 2014, 07:47:49 am

Title: Rear coilover adjustment
Post by: Kalpesh on May 31, 2014, 07:47:49 am
Hi all,

Wantvto lower the rear of my golf a touch more, am I right in thinking you remove the bolt holding the rear control arm in place so the spring comes out, make any adjustments reinstall spring and connect the control arm back up?
Title: Re: Rear coilover adjustment
Post by: biffobear on May 31, 2014, 10:31:18 am
depending on the make of coilover, you might have to remove the adjuster completely to get it low enough
Title: Re: Rear coilover adjustment
Post by: Kalpesh on May 31, 2014, 10:31:56 am
FK coilovers
Title: Re: Rear coilover adjustment
Post by: biffobear on May 31, 2014, 11:15:09 am
I think they can go low
Title: Re: Rear coilover adjustment
Post by: Kalpesh on June 04, 2014, 07:27:01 am
Will try and get round to it this weekend, one thing I have noticed the adjusters are on the bottom, can they be flipped around so that they are on the top so adjusting in the future is easier?
Title: Re: Rear coilover adjustment
Post by: biffobear on June 04, 2014, 04:53:22 pm
Yes, that should work ok
Title: Re: Rear coilover adjustment
Post by: SurreyED30 on June 05, 2014, 08:22:59 am
Will try and get round to it this weekend, one thing I have noticed the adjusters are on the bottom, can they be flipped around so that they are on the top so adjusting in the future is easier?
you cant with FK coilovers mate, i asked the same question when mine where fitted by the VAG garage near me. AP's etc can have the adjuster at the top but for some reason the FK kit has to be in the Control Arm  :laugh: someone will explain the truth behind it hopefully, its a pain in the butt i know haha

Jake
Title: Re: Rear coilover adjustment
Post by: jaffa on June 05, 2014, 11:54:01 am
iv thought about swapping mine to the tops but it only takes me 5 mins a side to drop it out and adjust it anyway so never bothered
Title: Re: Rear coilover adjustment
Post by: Andy on June 05, 2014, 12:39:38 pm
thats how i did mine when i adjusted my kw v1