MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: dkcampbell on June 18, 2014, 05:42:18 pm

Title: Milltek and Neuspeed ARB problem.
Post by: dkcampbell on June 18, 2014, 05:42:18 pm

hi guys...

i have a non res milltek on my ED30.... was a perfect fit, nice and snug into the bumper recess...

fitted my neuspeed ARB, and that was a tight squeeze, since fitting and running for a day or so, the back box has dropped, and the exhaust is actually sitting on the ARB...


has anyone else had this problem...?

thanks

Title: Re: Milltek and Neuspeed ARB problem.
Post by: Pikey Motorsports on June 18, 2014, 10:18:27 pm

Never heard it before.. Is your exhaust sitting correctly? And rubber mounts okay holding the box up?

Title: Re: Milltek and Neuspeed ARB problem.
Post by: vRSAlex on June 19, 2014, 02:46:30 pm

The roll bar sits over the exhaust, so there is no way it can hit it.

Upload some pics.

Title: Re: Milltek and Neuspeed ARB problem.
Post by: 56OctyVRS on June 27, 2014, 05:32:58 am

If you are getting a knocking noise from the rear; my guess is the drop links are loose or need replacing.