MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: J6JCC-GTI on June 18, 2014, 07:56:31 pm

Title: Boost feed needed!
Post by: J6JCC-GTI on June 18, 2014, 07:56:31 pm

I need a boost feed for my BCS powervalve, do I need a boost tap that attaches to the PCV pipe?
I've been trying to search on the forum but I can find anything!

Cheers

Title: Re: Boost feed needed!
Post by: MC71 on June 18, 2014, 08:00:25 pm

Yeap you'll need a fitting kit.

My BCS Powervalve TBE and my boost gauge both run of a multi tap from Forge that attaches to the PCV.

There's a few around, from APR, 42 Draft Designs and Forge. This is the one you want. Forge.......


~~ Clicky here ~~ (http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=260306&product=Fmbgfk2)


And the fitting instructions.....

~~ Clicky here ~~ (http://www.forgemotorsport.co.uk/media/FMBGFK2.pdf)

Title: Re: Boost feed needed!
Post by: J6JCC-GTI on June 18, 2014, 08:21:02 pm

Thank you very much that's perfect :happy2:

Is the forge one the best to get? I don't like the look of the little blanking screws?

Cheers

Title: Re: Boost feed needed!
Post by: MC71 on June 18, 2014, 08:35:50 pm

It's as good as any other TBH, plus its British manufactured so its a win win. Multi tap screws are fine, if you add anything else that requires a feed you'll be glad of a simple screw to remove. My forge fitting kit has been on for ages with no probs at all.

 :happy2:

Title: Re: Boost feed needed!
Post by: J6JCC-GTI on June 18, 2014, 08:46:14 pm

Just ordered a forge one!

Thank you very much :happy2:

Title: Re: Boost feed needed!
Post by: MC71 on June 18, 2014, 08:51:21 pm

^^^^ No worries.   :drinking: