MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: HughOR on June 30, 2014, 08:18:10 pm

Title: Retro fitting self-levellers and headlight washers
Post by: HughOR on June 30, 2014, 08:18:10 pm: Hi, does anyone have a list of whats needed for this? or part numbers or some links?

All I have at the minute is the gti and the xenons! Thanks.
Title: Re: Retro fitting self-levellers and headlight washers
Post by: galaxie500 on July 01, 2014, 08:14:23 am: Try this list (I'd saved it from a previous post. Many thanks to the original member bodger00)

Headlight washer harness from Kufatec – Approx. £30
Larger water bottle – 1K0 955 453 S – Approx £30
Washer level switch – 7M0 919 376 - £7
Rubber washer - 7M0 919 382 - £2
Rubber washer - 6N0 906 102 - £3
Pump – 3B7 955 681 - £25 (Ebay but new, VW = more expensive)
O ring washer for above – N 903 038 01 - £1
Washer hose comes in coils of 5 m (you need 3 ish) - £8 per m!

Here are all the little bits – depending on how you can route the pipe some of these (one or two ) may be spare
Angled Piece - 1J0 955 665 A - £2
Distributor – 7L6 955 873 - £2
Cable tie with terminal socket – 3D0 971 838 E - £1
Terminal Clip for hose X8 – 1J0 955 846 - £2.50 In total
Connecting part x2 – 1J0 955 665 E - £3 Each
Lift Cylinders (Jets) x2 - 1K5 955 978 – Approx £21 each
Nozzle Carrier left – 1K6 955 103 – Left - £10
Nozzle Carrier left – 1K6 955 104 – Right - £10
Speed nut x4 – N909 591 01 - £1 total
Panel bolt for above x4 – N103 546 02 - £1 total
Junction – 1T0 955 975 - £2
Junction – 1T0 955 665 -£2
Gasket – 431 955 465A - £1

Bumper mouldings
1K0 807 717 E GRU – Left - £11
1K0 807 718 E GRU – right - £11
1K0 955 109 A – Left - Cover for the jets - £8
1K0 955 110 A – Right - Cover for the jets - £8

I think that's everything
Title: Re: Retro fitting self-levellers and headlight washers
Post by: HughOR on July 01, 2014, 09:46:17 pm: Quote from: galaxie500 on July 01, 2014, 08:14:23 am
Try this list (I'd saved it from a previous post. Many thanks to the original member bodger00)

Headlight washer harness from Kufatec – Approx. £30
Larger water bottle – 1K0 955 453 S – Approx £30
Washer level switch – 7M0 919 376 - £7
Rubber washer - 7M0 919 382 - £2
Rubber washer - 6N0 906 102 - £3
Pump – 3B7 955 681 - £25 (Ebay but new, VW = more expensive)
O ring washer for above – N 903 038 01 - £1
Washer hose comes in coils of 5 m (you need 3 ish) - £8 per m!

Here are all the little bits – depending on how you can route the pipe some of these (one or two ) may be spare
Angled Piece - 1J0 955 665 A - £2
Distributor – 7L6 955 873 - £2
Cable tie with terminal socket – 3D0 971 838 E - £1
Terminal Clip for hose X8 – 1J0 955 846 - £2.50 In total
Connecting part x2 – 1J0 955 665 E - £3 Each
Lift Cylinders (Jets) x2 - 1K5 955 978 – Approx £21 each
Nozzle Carrier left – 1K6 955 103 – Left - £10
Nozzle Carrier left – 1K6 955 104 – Right - £10
Speed nut x4 – N909 591 01 - £1 total
Panel bolt for above x4 – N103 546 02 - £1 total
Junction – 1T0 955 975 - £2
Junction – 1T0 955 665 -£2
Gasket – 431 955 465A - £1

Bumper mouldings
1K0 807 717 E GRU – Left - £11
1K0 807 718 E GRU – right - £11
1K0 955 109 A – Left - Cover for the jets - £8
1K0 955 110 A – Right - Cover for the jets - £8

I think that's everything

That's great, thanks very much! Does that include all the wiring looms etc.?

Have you a link to that original thread you have mentioned by any chance?
Title: Re: Retro fitting self-levellers and headlight washers
Post by: marko on July 01, 2014, 10:31:00 pm: Just finished these two mods on my car,not cheap but I'm happy to have done them.
Title: Re: Retro fitting self-levellers and headlight washers
Post by: DaveB@Vagbremtechnic on July 02, 2014, 12:03:36 am: Ive got the height sensors and arms got a pic some where, standby 1

Found it, from a 2012 TTRS

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fw69%2Fdave_brown1970%2F4f10bf39f9afc3ba650562d16eaa85bb_zpsa8ba8ddd.jpg&hash=fc0296c9d144eca81eefab7028041b229154c6da)
Title: Re: Retro fitting self-levellers and headlight washers
Post by: galaxie500 on July 02, 2014, 07:43:30 am: Try this thread:

http://www.mk5golfgti.co.uk/forum/index.php/topic,25018.msg355007.html#msg355007

PR
Title: Re: Retro fitting self-levellers and headlight washers
Post by: HughOR on July 02, 2014, 09:49:23 pm: Quote from: marko on July 01, 2014, 10:31:00 pm
Just finished these two mods on my car,not cheap but I'm happy to have done them.

Can you spot anything missing from the list above marko?
Title: Re: Retro fitting self-levellers and headlight washers
Post by: marko on July 02, 2014, 11:06:02 pm: Thats only for the headlight washers....the auto levelling is in the 350 price bracket to do.
Title: Re: Retro fitting self-levellers and headlight washers
Post by: HughOR on July 03, 2014, 07:51:31 pm: Quote from: DaveB1970 on July 02, 2014, 12:03:36 am
Ive got the height sensors and arms got a pic some where, standby 1

Found it, from a 2012 TTRS

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fw69%2Fdave_brown1970%2F4f10bf39f9afc3ba650562d16eaa85bb_zpsa8ba8ddd.jpg&hash=fc0296c9d144eca81eefab7028041b229154c6da)

Are you selling the parts Dave??? :laugh:
Title: Re: Retro fitting self-levellers and headlight washers
Post by: HughOR on July 03, 2014, 07:53:03 pm: Quote from: marko on July 02, 2014, 11:06:02 pm
Thats only for the headlight washers....the auto levelling is in the 350 price bracket to do.

oh sh1t! this might have to go on the long finger so :ashamed:
Title: Re: Retro fitting self-levellers and headlight washers
Post by: DaveB@Vagbremtechnic on July 03, 2014, 09:46:12 pm: They're sat here doing nothing mate so yes PM me an offer I'm not greedy.