MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: slider955i on August 05, 2014, 06:13:40 pm
-
hi guys as title says plastic rear abs sensor broken off , question if i remove brake disc would i be able to see sensor so that i can knock it out with a pin punch
thanks in advance
-
It'll help if the disc is out of the way. But it's a chew on getting them out when they're snapped off. I used a small screwdriver to punch a hole through the remaining bit, and a pair of long nosed pliers to pull bits out until I got it all.
-
problem diagnosed as wheel bearing cracked in the end , grrrrr
-
not wheel bearing sorry but the sensor ring had broken and worn through abs sensor but it all comes complete with wheel bearings etc another £300 plus lighter but glad to have it back working perfect
-
not wheel bearing sorry but the sensor ring had broken and worn through abs sensor but it all comes complete with wheel bearings etc another £300 plus lighter but glad to have it back working perfect
£300.00????? are you having a laugh, mine did this just the other week, full wheel bearing was £39.00 inc vat, granted I didn't need a sensor but they don't cost another £260.00 to buy that is for sure. only take 30 ins max to fit too,
-
not wheel bearing sorry but the sensor ring had broken and worn through abs sensor but it all comes complete with wheel bearings etc another £300 plus lighter but glad to have it back working perfect
£300.00????? are you having a laugh, mine did this just the other week, full wheel bearing was £39.00 inc vat, granted I didn't need a sensor but they don't cost another £260.00 to buy that is for sure. only take 30 ins max to fit too,
stealers again , sensor had broken off originally which i had caused and could not be bothered to sort it , then they found ring broken which they showed me , it had worn a groove in end of sensor , i suppose if i had done it myself ( engineer) i would have saved a bomb but cannot be bothered
-
thry charged a lot more than £39 for the bearing assembly