MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Markyed30 on August 09, 2014, 05:24:01 pm
-
Right I bought a pressure test kit connected it up but was pressurising my crank case air coming out of dip stick
Put it all back together and started it and burnt off a good bit of oil, Googled and alot of people have did the same what do I need to bung to stop this and do a proper test any ideas??
-
To pressure test what?
Sent from my iPhone using Tapatalk
-
Connects at turbo and tests for leaks under pressure like this
http://thumbs3.ebaystatic.com/d/l225/m/mcqs1m7FeSNDrhcdzDtzicg.jpg
-
You can test it like you have & remove the oil cap or test in sections
pipe from turbo then blank off the throttle body pipe also blank off breather pipe during the test
-
Pressurising the crankcase may point to a failed PCV
Sent from my iPhone using Tapatalk
-
Iv got a PCV revamp if I remove the oil cap it won't work as it just spits air out it