MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Sat Nav and Car Audio => Topic started by: PhilNUK on September 19, 2014, 12:30:39 pm

Title: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: PhilNUK on September 19, 2014, 12:30:39 pm
Hi guys.... as the title says I am getting that issue. It must think I have a reverse camera fitted?
It says 'is it safe to move?' or something similar

Is there an option to disable it?
Or is it meant to do it regardless of a camera fitted or not?

cheers
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: Mk5Dom on September 19, 2014, 12:37:51 pm
You'll need to turn RVC off in VCDS mate.
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: PhilNUK on September 29, 2014, 11:58:23 am
Quote from: Mk5Dom on September 19, 2014, 12:37:51 pm
You'll need to turn RVC off in VCDS mate.

Hiya. Have done this today and it's still happening. The guy at Awesome GTI said it might need some wiring alterations?


Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: SI-R32 on September 29, 2014, 12:41:20 pm
did you reset the 510 after making the changes in VCDS?
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: PhilNUK on September 29, 2014, 12:47:08 pm
Quote from: SI-R32 on September 29, 2014, 12:41:20 pm
did you reset the 510 after making the changes in VCDS?

The guys at the specialist did it and not sure if they reset. I will do that though. Just the two arrows and star button?
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: SI-R32 on September 29, 2014, 12:50:21 pm
Quote from: PhilNUK on September 29, 2014, 12:47:08 pm
Quote from: SI-R32 on September 29, 2014, 12:41:20 pm
did you reset the 510 after making the changes in VCDS?

The guys at the specialist did it and not sure if they reset. I will do that though. Just the two arrows and star button?

Yes that's all it should need, you always need to reset 510 after any changes in VCDS to take affect

there will be NO wiring issues at all, its all software driven , awesome are probably used to after market stereos where you have extra wiring to know if the cars in reverse
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: PhilNUK on September 29, 2014, 01:24:56 pm
Quote from: SI-R32 on September 29, 2014, 12:50:21 pm
Quote from: PhilNUK on September 29, 2014, 12:47:08 pm
Quote from: SI-R32 on September 29, 2014, 12:41:20 pm
did you reset the 510 after making the changes in VCDS?

The guys at the specialist did it and not sure if they reset. I will do that though. Just the two arrows and star button?

Yes that's all it should need, you always need to reset 510 after any changes in VCDS to take affect

there will be NO wiring issues at all, its all software driven , awesome are probably used to after market stereos where you have extra wiring to know if the cars in reverse

Cheers mate! That sorted it!
Title: Re: RNS510 - screen goes black when I put car in reverse - 'safe to move'
Post by: Mk5Dom on September 30, 2014, 08:18:59 am
Good stuff!


Sent from my blower using Tapatalk.