MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: biffobear on September 22, 2014, 01:37:40 pm

Title: milltek exhaust reducer
Post by: biffobear on September 22, 2014, 01:37:40 pm

hi, has anyone got a spare reducer from milltek intermediate pipe to standard gti exhaust, thanks

Title: Re: milltek exhaust reducer
Post by: th3_f15t on September 22, 2014, 04:15:56 pm

Have you contacted Milltek directly to see if they can supply you with one, or you after a used one to save some funds?

Title: Re: milltek exhaust reducer
Post by: biffobear on September 22, 2014, 04:48:17 pm

here,s why, Many thanks for your email.

 

With regards your enquiry an adaptor is not available for the installation of the high flow downpipe and sports cat onto the OE system.

 

Due to the diameter differences and the restrictions within the OE system the heat build up within the downpipe and sports cat would cause damage and premature failure of the catalyst assembly, especially if used with additional hardware changes and software changes.

 


Regards

 

Leigh Ravey