MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: brinks787 on September 25, 2014, 06:22:14 pm

Title: Bonnet insulation
Post by: brinks787 on September 25, 2014, 06:22:14 pm
For a little while now the bonnet insulation on my 08' GTi has been shedding, sagging and falling apart where it sits in the bonnet at the rear edge.   After reading many posts on various forums it seems its not uncommon and its a good idea to replace rather than remove as it might be designed to drop onto the engine in case of a fire and smother it (not sure how well this would work).

Anyway, I got a new one today from my local dealer - P/N - 1KO 863 831 D @ £44.54 + Vat

It comes already fitted with new plastic clips and is a doddle to fit. 

Just though I'd post in case anyone else was having the same problem.  The new one seems a little stiffer, is made of different insulation material and has metal type heat shield at the front end.

(https://lh4.googleusercontent.com/-tcSTuUMaBvw/VCQ68tB4RdI/AAAAAAAAGEE/YdhMZvu1bT8/w990-h558-no/20140925_165421.jpg)

Old one with bottom edge falling apart.

(https://lh3.googleusercontent.com/-RY0udozr6nY/VCQ7tFSLU_I/AAAAAAAAGEM/srHBprqz8uw/w990-h558-no/20140925_165417-EFFECTS.jpg)

(https://lh5.googleusercontent.com/-NViylShlcZg/VCQ50n-RXbI/AAAAAAAAGC8/szl9DSlDL4I/w990-h558-no/20140925_165026.jpg)

My original bodge with some speed tape.

(https://lh5.googleusercontent.com/-v3_Sqcmg1MU/VCQ6sdgAHYI/AAAAAAAAGDg/PHkx5bqWrcg/w990-h558-no/20140925_165408.jpg)

Nice shiney new one!
Title: Re: Bonnet insulation
Post by: phatmuther on September 25, 2014, 06:33:02 pm
Looks nice, and not too bad for the price. Mines sagging a little so maybe one for the future.
Title: Re: Bonnet insulation
Post by: brinks787 on September 25, 2014, 06:37:27 pm
Its daft really, no one else sees it and it wasn't doing any real harm but I'm chuffed at how good it looks now and thats it back to be as it should again.

Little things like this really niggle me strangely.  Well worth the spend.