MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Degudodger on October 11, 2014, 08:14:09 pm

Title: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: Degudodger on October 11, 2014, 08:14:09 pm

Going to be replacing the plastic inlet manifold on my 2.0 TDI 170 for a alloy manifold off a BKD 2.0 140 and need a couple of part numbers :)

Manifold - Any changes in the different iterations of 03G129713 i should be aware of?
Gasket - 03G129717 (for alloy head)
Bolts - Can i reuse the existing bolts?

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: doylebros on October 11, 2014, 08:46:17 pm

From 2006 the gasket and manifold are different as they have suffix letters

Manifold requires AF

Gasket requires  D

As for the bolts ok to reuse torque valve 20 NM

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: Degudodger on October 11, 2014, 08:53:20 pm

Hi John,

Mine is a 2007, i'll look out for a /AF manifold on ebay  :happy2:

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: doylebros on October 11, 2014, 08:58:08 pm

Quote from: Degudodger on October 11, 2014, 08:53:20 pm

Hi John,

Mine is a 2007, i'll look out for a /AF manifold on ebay  :happy2:

This may help
http://www.partscats.info/volkswagen/en/?i=cat_vag_models&brand=vw&number=1714&set=1728&ein=2007&f=474&hauptgr=1234567890&hg=1&grf=012950420&bf=12950&hgug=129&ug=29&parent_id=2338510

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: Whitt_tdi on October 12, 2014, 09:47:06 am

Iv got a 170 tdi and mines got the alloy inlet on it already?

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: marko on October 12, 2014, 01:21:44 pm

Whats the purpose of the changeover??

Title: Re: Fitting alloy BKD Inlet Manifold to a BMN 170 - part numbers
Post by: Degudodger on October 12, 2014, 05:23:22 pm

The inlet flaps found in the plastic manifold found on the BMN engine unto 2008 (i believe) fail, the alloy manifold on the BKD fits the BMN and does not have flaps :)

Plus i need to clean my manifold.