MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Danbear79 on January 22, 2015, 10:15:18 pm
-
Ideas needed... tonight i went to fit my coilovers but 1 of the 3 bolts on the strut tower is kaput. After lots of trying to remove the bolt and knackering the bolt on the underside, i still can't remove it. Is it a case of drilling the bolt out from the top? Really wasn't expecting this, so any ideas will be appreciated
-
I had same just use a air chisel or if not just a lot of welly and a hammer and chisel
-
I had the same too. Drilled it out
-
Glad I'm not the only one haha. I drilled it out in the end and greased them up when re fitted