MK5 Golf GTI

All Things Mk5 => How to Guides / Troubleshooting => Topic started by: jollybob on January 30, 2015, 06:07:59 pm

Title: coding for LED projector headlights mk6 golf
Post by: jollybob on January 30, 2015, 06:07:59 pm

Hi, Im hoping someone can help me, I have just fitted a set of projector headlights with LED side lights to my mk6 golf,
I am trying to get the codes so I can run LEDs as DLR, Anyone who can help me I would appreciate any help on this subject, I do have the Ross Tec vagcom and I have tried many codes with no luck, hope someone can help. Best regards.

I have managed to code front projector LEDs to DLR and are working perfectly with the right brightness and dimming, but I have a new problem now my rear genuine vw rear LEDs are now faulty only the 2 inner lights light up plus the rear fog light is on perminant, brake light reversing light are working as they should, need help to get rear lights all working as they should, tried coding in Byte 18 but this puts the fault back to front projectors they are the two bright and no DLR lights, hope someone can help thank you for reading.

Title: Re: coding for LED projector headlights mk6 golf
Post by: jason_rmh on January 30, 2015, 08:14:40 pm

The LEDs on those lights are wired to the side lights / parking lights so vcds won't know you have DRLs, so I don't think its possble to set your parking lights as DRLs, unless you modify the wiring.

Jas

Title: Re: coding for LED projector headlights mk6 golf
Post by: omeydz on February 12, 2015, 08:31:15 am

Iv done it mate. Need to splice wires Im afraid