MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: MAT ED30 on December 16, 2008, 03:34:55 pm
-
http://www.mk5golfgti.co.uk/forum/index.php?topic=909.msg14375#msg14375
they are big and they a clever so have a look and price at the bottom for what i can get them for :wink:
-
would you accept £ 500 and i will also pay for you to get into the pod. :jumping:
-
would you accept £ 500 and i will also pay for you to get into the pod. :jumping:
lol i have just been to have a look at the discs that my mate has in stock and they are massive but £500 gets you the cupra/r32 setup but either would look the dogs nuts behind your new rims :wink:
-
ok i will give you £ 700 for the RS4 but that would be fitted. :grin:
I think the R32 set up will be enough for me so once the wheels are on i will check the gappage and then you will have a PM. :party: :santa:
-
ok i will give you £ 700 for the RS4 but that would be fitted. :grin:
I think the R32 set up will be enough for me so once the wheels are on i will check the gappage and then you will have a PM. :party: :santa:
i will have a set in my hands in the morning for one of the guys on here so i can get all the dimensions from them if you want.
-
ok i will give you £ 700 for the RS4 but that would be fitted. :grin:
I think the R32 set up will be enough for me so once the wheels are on i will check the gappage and then you will have a PM. :party: :santa:
i will have a set in my hands in the morning for one of the guys on here so i can get all the dimensions from them if you want.
I am pretty sure that they will clear the wheel, Luca reckons they dont stick out anymore than the gti ones and even if they do it will only be a couple of mil me thinks.
-
ok i will give you £ 700 for the RS4 but that would be fitted. :grin:
I think the R32 set up will be enough for me so once the wheels are on i will check the gappage and then you will have a PM. :party: :santa:
i will have a set in my hands in the morning for one of the guys on here so i can get all the dimensions from them if you want.
I am pretty sure that they will clear the wheel, Luca reckons they dont stick out anymore than the gti ones and even if they do it will only be a couple of mil me thinks.
yes they will be fine fella :smiley:
-
18's won't clear and most 19's need to run a 15mm spacer with this set up :happy2:
Go on do it you know you want to they flipping Immense. I was out in an RS4 doing 150 hit the brakes and we where doing 45 within 150 yards. I was hanging out of the seat lol.
-
eeak...i hope those discs were allowed to cool down properly! lol
ive cracked a disc on an rs4 once! oops!
-
probably not :laugh: thats why they always end up with cracks around the drilled holes
-
very nice price, has anyone actually put these on a Golf yet ?
-
very nice price, has anyone actually put these on a Golf yet ?
be the first lol
-
i would rather someone else tested them LOL, whats the s3 kit like ?
-
i would rather someone else tested them LOL, whats the s3 kit like ?
its the same as the cupra / r32 just with covers over them
-
Are the calipers cast iron like the Porker ones or billet alloy?. If they are iron then they will weigh a HUUUUUUUUUge amount!!
-
Are the calipers cast iron like the Porker ones or billet alloy?. If they are iron then they will weigh a HUUUUUUUUUge amount!!
there supposed to be brembos
-
Are the calipers cast iron like the Porker ones or billet alloy?. If they are iron then they will weigh a HUUUUUUUUUge amount!!
there supposed to be brembos
Hmm, should be alloy then.
Anyone know the caliper weight?
-
Are the calipers cast iron like the Porker ones or billet alloy?. If they are iron then they will weigh a HUUUUUUUUUge amount!!
there supposed to be brembos
Hmm, should be alloy then.
Anyone know the caliper weight?
dont know but i am on my way to vw now and they have the discs in stock and the r32 ones so will take a pic of them
-
check the bad boys out :drool:
cupra discs and the rs4 discs 365mm they also do a 380mm :grin:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fd122%2Fmat138l%2Frs4discs.jpg&hash=065496023cc2447848a52c48ee8c2d32ae6c2fb8)
i think this i y u need the spacer of 3mm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fd122%2Fmat138l%2Frs4discs1.jpg&hash=688146ecea8e0df014f2117bb744f7763f68e9fe)
they are stunning :drool:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fd122%2Fmat138l%2Frs4discs2.jpg&hash=43171b93c56993d2f868732d637817ed0c730999)
-
Are the calipers cast iron like the Porker ones or billet alloy?. If they are iron then they will weigh a HUUUUUUUUUge amount!!
there supposed to be brembos
Hmm, should be alloy then.
Anyone know the caliper weight?
picked one up the other day nice and light :)