MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Janner_Sy on November 30, 2009, 09:51:27 pm
-
whats the going rate for the maf reading on a k03.
my peak MAF was 193g/s iirc which using the old divide by 0.8 would equal 241bhp, which id throw a wild one out and say i have a fair bit more than. thinkive read somewhere that stgage 2+gti's put out between 190-205g/s.
I know you have to take it witha pinch of salt due to it not taking into account the timing etc.
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
So there you go Sy. Can you still reload the Bluefin or is it too late? :P
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
260bhp stage 2 normally seen a couple do it on jkm's
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
So there you go Sy. Can you still reload the Bluefin or is it too late? :P
lol, revo next
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
260bhp stage 2 normally seen a couple do it on jkm's
Really, I'd be surprised at that, Stage 2 K03's consistently make 240-244 on JKM's dyno.
-
Infairness I was there when Makefish's Stage 2 Octy made 285hp and 350lbft on a K03. It was later found to operating outside the parameters of the map and was toned down to become the Revo Stage 2+ development car which ended up around 280hp and 315lbft if I remember correctly.
-
RR's k03 Gti is an excellent case in point. But if u go further north u can find k03 Gti's doing 270bhp maybe. One even did 300bhp alledgedly. Once upon a time dangb's leon pre bt made 290bhp but even he had to laugh at that!
-
Sorry I forgot to say that was at JKM and did involve Jim having to restrap it. :surprised:
Enjoy. :evilgrin:
-
revo stage 2
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi756.photobucket.com%2Falbums%2Fxx202%2Fsimonskerton%2FVRS1.gif&hash=01992f7cff669a48ea48cd2ae36afa877927a7ab)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi756.photobucket.com%2Falbums%2Fxx202%2Fsimonskerton%2FBLU1.gif&hash=7d53c793e279b6b10a70d316928e5a406df3fd42)
stage 2 sharkperformance
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi756.photobucket.com%2Falbums%2Fxx202%2Fsimonskerton%2Fjkmdyno1.jpg&hash=c19e9589384612d08a197434b6a30e5863385bc6)
revo stage 2+
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi756.photobucket.com%2Falbums%2Fxx202%2Fsimonskerton%2Fscan0002-11.jpg&hash=d2c40860e786b9d0be9dc57a829f96682edc8b26)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi756.photobucket.com%2Falbums%2Fxx202%2Fsimonskerton%2FOCT23VRS1.gif&hash=99b77a220047f1cbd889cbb79e047c8b44138d25)
all of these on JKMs rollers. two of them this as well.
mine made 277 and 286 on AMDs rollers, while i very much doubt that personally especially with the issues i had, i doubt they were 40bhp out. i reckon she was aound the 250bhp area then
-
A stage 2 K03 based gti runs at approximately 240bhp IIRC
260bhp stage 2 normally seen a couple do it on jkm's
Really, I'd be surprised at that, Stage 2 K03's consistently make 240-244 on JKM's dyno.
....Extremely consistently in my case - Whatever the time of year and over a period of nearly 2 years.
Further backed up by a 245 bhp plot this weekend on SurreyRR Dyno-Dynamics.
-
RR's k03 Gti is an excellent case in point. But if u go further north u can find k03 Gti's doing 270bhp maybe. One even did 300bhp alledgedly. Once upon a time dangb's leon pre bt made 290bhp but even he had to laugh at that!
i agree that some RRs show huge figures but its also been shown that different DD rollers give very similar results when compared to each other.
it also worth noting that RRs gti is minus an intake, and id bet hes going to get a fair whack more out of it once his twintake is fitted.
back on subject, has anybody know of any MAF readings for a k03, any stage??
hedge did you ever log yours, (think i might have got your graph up as well, hope you dont mind)
-
hedge did you ever log yours, (think i might have got your graph up as well, hope you dont mind)
Which one Octy? Or Golf?
-
RRs is the only one i have seen reading below 250bhp on stage 2, but i bet that is due to the ones i have seen have all had intakes. Id bet his is putting out a similar output as the stage 2 dynos i posted above.
@hedge was your octy, got it from the vRS on the dyno thread on brisky
-
@hedge was your octy, got it from the vRS on the dyno thread on brisky
Sure? I only ran mine once on stage 1 and got quite low figures. :confused:
-
@hedge was your octy, got it from the vRS on the dyno thread on brisky
Sure? I only ran mine once on stage 1 and got quite low figures. :confused:
guess its not the one i got then :rolleye:, could maybe be makefish's
do you ever recall seeing any maf info on briskoda, cant find any.
-
Heres mine.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.jkm.org.uk%2Fperformance%2FMisc%2FGallery%2Frollingroaddays%2FBRISKODA%252020%252001%252007%2FBriskoda%2520RR%2520Plots%2FSIX.gif&hash=866a23d577838e2998fe9a9c2c7cd8f54c300a83)
and
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.jkm.org.uk%2Fperformance%2FMisc%2FGallery%2Frollingroaddays%2FBRISKODA%252021%252007%252007%2FBriskoda%2520Plots%252021%2520July%25202007%2FHV06.gif&hash=ce51d8fc711d828c36b28c379454b7a1767bd29b)
I did see 232 on stage 1 but after an EVOMS and TBE things improved. We did find the bolts attaching the Cat to the turbo were quite loose. :surprised:
-
RRs is the only one i have seen reading below 250bhp on stage 2, but i bet that is due to the ones i have seen have all had intakes. Id bet his is putting out a similar output as the stage 2 dynos i posted above.
....I'm just running a Carbonio intake but my Forge TWINtake should be ready in next couple of weeks and we're going to do before and after runs etc on JKM's dyno. I'll then post it all in a review thread.
-
looking forward to that. wish i had been able to do the same. tried it with AMD but gthings like ambient temp were 17 degrees out, so pointless to compare.
-
tony_danza car did 270 bhp with 330lbft of torque on Awesome's RR last weekend.
And to your query, the stage 2+ k03 cars usually max out at 200-205g/sec.
-
much appreciated bacilus. (got lost in Dyno discussions again, lol)
that was what i was hoping. mine should be a little closer to that once i get a intercooler i think.
id be over the moon with 270bhp 330Ibft. (his is only stage 2 isnt it)
TBH, when i had bluefin i wanted big figures to make me think the car was runnig well. now i dont care cos the car feels like its running better, and im happier with it. so if it doesnt make what i expect i ont be to upset, :ashamed:lol. plus once i get my IC and boost pipes and fit this exhaust im having the map tweaked, and im going to have 800Ibft :signLOL:
-
mine should be a little closer to that once i get a intercooler i think.
afaik the uprated IC will not affect the MAF reading, it will simply allow you to slightly up your boost without detriment to performance.
-
mine should be a little closer to that once i get a intercooler i think.
afaik the uprated IC will not affect the MAF reading, it will simply allow you to slightly up your boost without detriment to performance.
thats a very good point, ICs cool inlet temps not the MAF, what a sprog, complete wrong side of the turbo lol. i was going off the cooler air thing, which reminds me i stil need to sort my ducting out
-
It may be relevant or helpful to add that my Revo2 K03 GTI has now plotted 261 bhp a couple of months after initially installing my Forge Twintake. All on JKM's dyno. The curves are good.