MK5 Golf GTI

All Things Mk5 => Modifications & Technical Area => Performance Modifications => Topic started by: Alfalfa91 on April 08, 2015, 09:42:40 am

Title: What BHP will i be running?
Post by: Alfalfa91 on April 08, 2015, 09:42:40 am

Hi guys,

Is anyone able to tell me what kind of bhp i'd be running if i had a milltek catback, k&n panel filter with a bluefin chip?

Thanks.

Title: Re: What BHP will i be running?
Post by: StuF on April 08, 2015, 12:05:50 pm

Edition 30 or GTI?

I would imagine a GTI would be 250bhp ish with an ED30 around the 300bhp mark

You would also notice an increase in performance with removal of the standard down pipe pre-cat and running 99Ron petrol

Although I personally wouldnt focus on willy waving bhp figures and concentrate on how the car feels following any modification
 :happy2:

Title: Re: What BHP will i be running?
Post by: Alfalfa91 on April 08, 2015, 04:14:48 pm

Its a GTI I have,

Yeah I was just wanting a rough figure but don't think I'm going down that route anymore as I have been speaking to someone on here that has a full milltek system with decat so that sounds like a better idea then a remap.

Can you jump straight to a stage 2 map if you have all the supporting mods?

Cheers

Title: Re: What BHP will i be running?
Post by: Sug on April 08, 2015, 04:23:55 pm

Yes, you can go stage 3 with the correct mods

Title: Re: What BHP will i be running?
Post by: Alfalfa91 on April 08, 2015, 05:17:19 pm

Okay cheers, does anyone know what correct maf scailing is? Is it them just mapping the maf sensor?

Title: Re: What BHP will i be running?
Post by: robmcclel on April 09, 2015, 02:29:37 pm

superchips say you'll get about 260bhp at stage 2, you need a new cold air intake though and it's more beneficial to have a full exhaust. A panel filter might not be enough for stage 2 I'm not sure on that one

Title: Re: What BHP will i be running?
Post by: Alfalfa91 on April 09, 2015, 03:08:29 pm

Yeah i'm trying to find a second hand system preferably a decat system and I'll be looking into a intake.

Do you know where you can find the pipe section that has the MAF sensor on it's own?

Quote from: Alfalfa91 on April 08, 2015, 09:42:40 am

Hi guys,

Is anyone able to tell me what kind of bhp i'd be running if i had a milltek catback, k&n panel filter with a bluefin chip?

Thanks.

Title: Re: What BHP will i be running?
Post by: robmcclel on April 09, 2015, 03:21:36 pm

Do the cold air intake systems not come with a pipe to hold the MAF sensor?  :confused:

Title: Re: What BHP will i be running?
Post by: Alfalfa91 on April 09, 2015, 03:25:37 pm

Quote from: robmcclel on April 09, 2015, 03:21:36 pm

Do the cold air intake systems not come with a pipe to hold the MAF sensor?  :confused:

Yeah they do but my mate has just the revo cone filter off his old Audi and its just lying about so if i manage to get the MAF sensor part I've gained a intake for cheap cheap lol

Title: Re: What BHP will i be running?
Post by: robmcclel on April 09, 2015, 04:54:28 pm

Quote from: Alfalfa91 on April 09, 2015, 03:25:37 pm

Yeah they do but my mate has just the revo cone filter off his old Audi and its just lying about so if i manage to get the MAF sensor part I've gained a intake for cheap cheap lol

Well try and contact REVO and see if they will sell the link pipe separately  :stupid: trying to find one second hand is going to be like finding a needle in a haystack cause most people will want to sell them as a full intake kit.

Title: Re: What BHP will i be running?
Post by: StuF on April 09, 2015, 04:57:43 pm

There is a cheap induction kit going on eBay at the moment although I dont know much about the type!

http://www.ebay.co.uk/itm/111639139963?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

P.S the advert is nothing to do with me! 

Title: Re: What BHP will i be running?
Post by: Alfalfa91 on April 09, 2015, 06:32:10 pm

Quote from: StuF on April 09, 2015, 04:57:43 pm

There is a cheap induction kit going on eBay at the moment although I dont know much about the type!

http://www.ebay.co.uk/itm/111639139963?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

P.S the advert is nothing to do with me! 

Cheers boys