MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Scotty600 on April 16, 2015, 01:47:55 pm

Title: Millyek 2.75 or 3 inch
Post by: Scotty600 on April 16, 2015, 01:47:55 pm

Which system would be better system to use as milltek offer both and i am stage 3 tuned

Title: Re: Millyek 2.75 or 3 inch
Post by: StuF on April 16, 2015, 01:54:42 pm

Bigger is always better  :signLOL:

Title: Re: Millyek 2.75 or 3 inch
Post by: Bignod00 on April 16, 2015, 04:01:35 pm

^^^^This! :happy2:

Title: Re: Millyek 2.75 or 3 inch
Post by: GrayMK5GTI on April 16, 2015, 06:24:16 pm

2.75 would restrict you.

Do Milltek even do a full 3in system? I thought it was only BCS which do a full 3in front to back

@toosmiles (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=8438) just read on R-OC that your 3in milly went down to 2.75in?

Title: Re: Millyek 2.75 or 3 inch
Post by: Scotty600 on April 16, 2015, 08:32:20 pm

Yes milltek and scorpion do a system

Title: Re: Millyek 2.75 or 3 inch
Post by: th3_f15t on April 16, 2015, 09:02:16 pm

Milltek downpipes for the mk5 GTI are 3 inch then go into a 2.75 inch, but I think a revised cat-back system with smaller back box and larger diameter is now out on the streets (correct me if I'm wrong). Also, think the mk6 and mk7 systems are 3 inch from Milltek?

Title: Re: Millyek 2.75 or 3 inch
Post by: Stooey on April 16, 2015, 09:28:39 pm

My jetex system is also 3" all the way back