MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: RetroRaz on April 27, 2015, 07:39:48 pm
-
Hi all.
I bought a tpms kit and not sure what some of the wires are for or where they go. Can someone help?
I know this one goes to the abs pump as it's the longest wire
(https://farm9.staticflickr.com/8792/17104363998_28b0a3b1bf_k.jpg)
Not sure what these 3 wires are for
(https://farm8.staticflickr.com/7674/17266183746_40adf61e33_k.jpg)
And then this black connector comes off
(https://farm8.staticflickr.com/7707/17104589600_c240e6aba5_k.jpg)
-
Used this guide when i fitted mine.
http://www.mk5golfgti.co.uk/forum/index.php/topic,25814.msg335319.html#msg335319 (http://www.mk5golfgti.co.uk/forum/index.php/topic,25814.msg335319.html#msg335319)
-
aah so remove 3 wires from the ABS plug and connect into the black connector and then the 3 remaining wires on the TPMS loom go back into the abs pump. As if its going in a loop?
-
Yep its a loop Raz.
This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)
-
Yep its a loop Raz.
This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)
nice one omar. I will give this a try next week some time :)